name
Vinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.x
Vinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.x

Van chịu áp suất cao model 9560 Series - USA

van chiu ap suat cao 9560 series usa support

Giới thiệu

- The 9560 Series high pressure brass valves are used on cylinder filling panels, tube trailers, and other high pressure manifolds and piping systems. The 9560 Series exhibits a very low operating torque under pressure for ease of manual operation..

Tính năng và mô tả

- 4200 psig maximum working pressure with a 5 to 1 safety factor.

- Non-rising stem design with O-Ring Seal for durable service.

- Large brass handwheel for easy low torque operation under pressure.

- All valves cleaned for use in oxygen per CGA G-4.1.

- Temperature range -40°F to +165°F.

Materials

Body, bonnet, stem, and seat retainer, stem seal

retaining rings and washer ...................................................... Brass

Stem O-ring .............................................................................. Viton

Handwheel Washer ................................................................. PTFE

Soft Seat Option: The soft seat valves use a CTFE seat disc in the seat retainer to create a “bubble-tight” seal against a machined seat surface on the brass body. Valve Cv is 2.6. The soft seat option is especially useful for small molecule gases like hydrogen and helium, but can be used for a variety of non-corrosive industrial gases including oxygen, argon, nitrogen, carbon dioxide, nitrous oxide, and acetylene.

Metal Seat Option: A copper seat disc is used in the seat retainer to create a seal against a Monel body seat, which is installed into the body and can be replaced. Valve Cv is 2.3. The metal seat option minimizes the possibility of seat decomposition or ignition in oxygen service under adiabatic compression. The metal seat option is recommended for oxygen, and can also be used for other non-corrosive industrial gases. The metal seat option is not to be used for acetylene due to the copper seat. Not to be applied in hydrogen or helium service or where a “bubble-tight” seal is essential. (Note: C in part number)

Bonnet Versions

• Standard Bonnet for low profile.

• Panel Mount Bonnet for ease of panel installation. Includes threaded bonnet and nickel plated brass mounting nut. Metal Seat Option 1.625” diameter panel hole required for mounting. (Note: P in part number)

HP Version

• With metal seat option.

• 5600 psig maximum working pressure with 4 to 1 safety factor. Use “HP” prefix for metal seat. (ex. HP9560CB). Nylon seat option available also (ex. 9560NB)

van chiu ap suat cao 9560 series usa 1

Ordering Information

Part NumberInlet ConnectionOutlet Connection

Height

A

Height

B

Height

C

Soft SeatMetal Seat
9560A 9560CA ½” F. NPT ½” F. NPT

4.36”

*[6.19” for panel

mount version]

3.25” 5.5”
9560B 9560CB ¾” F. NPT ¾” F. NPT
9561R 9561CR 1”-11½” NPSM R.H. 1”-11½” R.H. Female Swivel

5.27”

 

9561RL 9561CRL 1”-11½” NPSM R.H. 1”-11½” NPS L.H. Female Swivel
9561L 9561CL 1”-11½” NPSM L.H. 1”-11½” L.H. Female Swivel
9563R 9563CR 1”-11½” NPSM R.H. 1”-11½” NPSM R.H. 3.79”
9563L 9563CL 1”-11½” NPSM L.H. 1”-11½” NPSM L.H.
9560ASE 9560CASE .843 - .847 .843 - .847 3.25”
9560BSE 9560CBSE 1.053 - 1.057 1.053 - 1.057
9560BSE-B 9560CBSE-B 1.053 - 1.057 ¾” F.NPT

Chứng chỉ chất lượng

- SQC certificate for quality management system,has complied with the requiements of GB/T 19001-2000 idt ISO 9001:2000

- Manufacture License of Special equipment in People's Republic of China.